Squirrel Hanging Corn Feeder

Find a suitable tree branch. You will want to select a low-hanging tree branch that requires the squirrels to do some maneuvering to reach it, but that still rests in a comfortable line of vision for you viewing pleasure.

Hang simple wires from the branch. In this case, twisted coat hangers or fishing-wire with a high tensile strength will suffice. Hang these wires with roughly six inches to one foot of slack around the tree limb. This will require that squirrels maneuver to get to the food without providing a major obstacle to them. Try attaching corn cobs to a bungee cord which is then hung from a tree limb or platform. Squirrels will perform acrobatics in an effort to feed on the corn, which is entertaining to watch.

Create loops or holding points at the end of each wire. Once the wires are fastened to the tree branch, create a mechanism at the end of each wire capable of holding an ear of corn. The simplest way to do this is to twist a loop into the wire hangers that will support an ear of corn or tie a loop into fishing-wire.

Attach the corn. Attach whole ears of corn into the loops you created at the end of your wires. Make sure they are securely fastened, as they will need to support the weight of squirrels climbing on and hanging off of them. If the squirrels knock the corn to the ground, it largely defeats the purpose of employing a hanging feeder which is designed to make the squirrels “work” for the food.

Enjoy the feeder in action. Now that the hanging wires have been stocked with corn, sit back and enjoy watching the squirrels perform various physical and acrobatic feats to get to the food supply. Be sure to replace exhausted ears of corn to keep the squirrels coming back.

Squirrel Corn Feeder

Find a suitable piece of wood. Wood will function as the base of the corn feeder, so it is important that you find a stable piece of wood that is strong enough to remain in one piece once nails have been driven through it and can support the weight of the corn as well as the weight of the squirrels.

Attach nails or spikes. Once you have selected a suitable piece of wood, drive long nails or small spikes into the wood. Make sure the nails are spaced far enough apart from one another so that they can comfortable be fitted with an ear of corn.

Skewer corn cobs. Drive full ears of corn onto the nails you inserted into the piece of wood you selected. Make sure the ears are spaced far enough apart to allow multiple squirrels to access them at once.

Place the feeder in an accessible area. Make sure that the feeder is placed in an area that is ideal for the squirrels and also accessible to you. You will need to be to access the feeder to replenish the food supply. If your primary aim is to observe the squirrels that come to your yard to feed, make sure the feeder is located in an area that will be visible to you.

Monitor the food supply. If a feeder remains empty or the food supply has been exhausted for some time, squirrels will move on to other food sources. Be sure to keep your feeder well-stocked with ears of corn to ensure the squirrels keep coming back.

Food Tricks

FOOD TRICKS

Spoon Signs

SPOON SIGNS

Take some old spoons or get cheap ones from a pound shop / thrift store. 

Flatten the heads and paint them with waterproof paint. Write the names of the plants / flowers on the heads with a waterproof pen.

Seedling containers

SEEDLING CONTAINERS

Instead of buying expensive dedicated seedling containers, you can simply go to the Pound shop and buy cheap plastic storage containers and plastic/paper cups. Works best with clear lids.

Milk / juice Bottle Watering Can

MILK / JUICE BOTTLE WATERING CAN

Simply heat up a needle before using it to poke holes in the jug’s cap.

Coconut Birdhouse / feeder

COCONUT BIRD HOUSE

NEEDED:

1. Coconut

2. Drill + small drill bit + circular drill bit

3. Hemp twine

4. Flat-head screwdriver

5. Coconut scrap or other item

STEP 1:

Drain the coconut by sticking your srewdriver, or other implement, into the larger, softer mouth of the coconut's "face." Gently move screwdriver around to enlarge the hole. You can also use a drill bit if you want. Shake out the fluid.

Using the circular bit in your drill, pick a spot on the coconut and cut a hole. Make sure to have the "face" of the coconut pointed upwards because that will be where your string comes out.

Once your hole is made, use the flat-head screwdriver to remove the meat. I find that using the screwdriver to score the meat before prying the meat out, makes everything work better. Use a thrust and twist technique to work small chucks of coconut loose. Periodically you will need to shake the chunks out.

 STEP 2:

Using your drill and small drill bit, make three (or more) holes in the bottom of your coconut.

STEP 3

Using your hemp twine, cut an appropriate length and feed it through the hole you made in the coconut's "face."

At the end of the twine inside the coconut, knot/attach a fragment of coconut, or other item. This will keep the coconut on the twine when you hang it.

Trim the twine at the end of your knot.

ALL DONE! LET YOUR BIRDS FIND THEIR NEW HOME!

You could also attach some straw or coconut leaves to it as a rood:

Also make a bird feeder from coconut:

Seed Packs

HOW TO MAKE SEED PACKS FOR FREE

Click this link https://www.tinyurl.com/SeedTemplate for an easy and free Template printout.