How to transfer a photo onto wood
First Attempt
This first video is more detailed than the second as I’m going through it from start to finish with very little edits.
Enjoy this then read on…
As you’ll see the end result was left a bit hazy and white and as people have commented I agree it was due to me using the PVA glue at the end instead of a varnish.
Second Attempt
Well it’s 12 months on and we’ve just tried two projects onto two types of wood and got very different results. From the YouTube comments I planned to try coating the finished image with varnish rather than PVA so as you’ll see in the process below that’s the way to go.
So there it is and if you’ve watched with videos all the way through you’ll have seen the pitfalls as well as the things to do so now lets look at the process in simple steps.
The Process
Step 1 – Get some wood
Before you sort your image, or maybe around the same time, you need to know what wood you are transferring the photo to as it could change the size and format of your image. Some guys on the youtube channel have suggested applying an image to their guitars or a piece of furniture but if you’re just starting out we had great success with a hardwood chopping board in the second video. Here’s a link to some cheap ones and the UK one even has a border! Amazon.co.uk / Amazon.com
If you’re going to a hardware store then look for a nice clean piece of wood thats plained and straight. You may need to cut it down but keep in mind the size of paper you’ll be printing on. In the UK it would be A4 ideally so your wood wants to be approx 210 by 297mm the same as the A4 print.
Step 2 – Prepare your photo
So you need to find a photo you like. Now if you have wood already and need to fit it to the size of that and hopefully it will be A4 or under else you’ll be paying more for your printing. (Of course you can go A3 if you like but I’d maybe start off smaller on your first project).
If your photo needs editing or flipping around I recommend Pixlr as an online app. I have given instructions on this process in the first video.
I do recommend reducing the saturation and ideally warming the image up so it looks more golden and will sit better on the wood. Bright, full colour images don’t look as good in my opinion.
Step 3 – Print your photo
Now this is the stage that causes most of the confusion and questions on my YouTube channel so I’ll go through it clearly. As I have a photo printer and I’m fussy I chose in both videos to print the photo I wanted to the correct size at home onto photo paper. I then took my photo to a printer like Staples and asked them to photocopy my photo on their laser photocopier just onto basic paper (ideally 80gms weight).
You can transfer from an inkjet printer (as seen here), but the results are far better from a laser copier / laser printer.
Step 4 – Get everything ready
What do I mean? Well as you can see from the videos you need to lightly sand over the wood with fine sand paper. You will need some Gel Medium or Mod Podge (links below) so get that ordered in. You want to apply with something like a credit card or loyalty card so have that ready, and have some cloth or towel available to clear up your excess gel.
Step 5 – Apply the photo to the wood
Now we’re getting started!
Get that Gel Medium out and apply it liberally but not too thick (you’ll see it in the videos). Place your photo down on the wood and wipe your card over it to get a nice smooth finish.
Step 6 – Walk away
Yep, you need to leave that baby overnight, stop your fiddling and go do something else.
Step 7 – Time to start rubbing… and rubbing… and rubbing
Yes this is the part we flew over in the second video as it can get a tad boring. Grab a jug of water (warm or cold) and a sponge / cloth. Lightly soak the paper while very gently rubbing the paper. It’s so important as we’ve spelt out on the videos to be gentle, not rubbing too hard and being patient. As you’ll see we stopped when it looked most of the way there, let it dry and then came back and rubbed a little more.
What we discovered in the second video that I didn’t fully realise in the first is that you can’t get it all. As long as when it’s wet it looks good then that’s the time to call it a day and let it dry. You’ll see this demonstrated in the second video.
Step 8 – Seal the image
We used an aerosol wood oil for this as it’s the best we could find in the hardware store (B&Q). If we’d have been in a craft store I’m sure there would have been more appropriate products but the idea is that we’re sealing in the photo with a nice gloss finish to take away the residue of the paper. As you’ll see at the end of the second video it worked a treat!
That’s it!
Source: SLRCoaching
